Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Gretna, LA (70053) · Local Professionals

New Orleans Metal Roofing · Fast response in Gretna and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Gretna is a West Bank city of raised cottages, brick ranches, and post-war homes, many with the low-pitch roofs and mature live oaks that define the 70053 ZIP code. The housing stock here is a mix of mid-century brick and newer elevated construction, and the flat, low-lying terrain means drainage and wind-driven rain are constant concerns.

Homeowners in Gretna call New Orleans Metal Roofing because we know the difference between a roof that survives a summer squall and one that fails at the first fastener. From the historic streets near the Gretna Green to the newer subdivisions off the West Bank Expressway, we have seen how wind and humidity treat metal roofs, and we bring that experience to every free inspection.

Metal Roofing in Gretna (70053)

Gretna sits on the flat, low Mississippi River crescent, and that means water has nowhere to go during the long, soaking thunderstorms that roll through in summer. Many homes here are raised cottages or slab-on-grade brick ranches with low-pitched roofs, and the combination of intense sun, high humidity, and wind-driven rain punishes fasteners, seams, and flashing. Live oaks and magnolias are beautiful but drop limbs that puncture panels and clog gutters, and the older 5V crimp roofs on some of the historic West Bank cottages are prone to screw fatigue after decades of thermal movement. We also see a lot of retrofit work over existing shingles, which requires careful attention to deck condition and local code limits on layers.

Our team has been serving Gretna and the surrounding New Orleans area for years, handling everything from standing seam installations on elevated new builds to leak repairs on older crimp roofs near the Gretna Heritage Festival grounds. We understand the permitting rhythms of Jefferson Parish and the design review that can apply in the historic districts, and we plan each job around the tight lot access and mature landscaping that are common here.

Our services in Gretna

How a Job Works in Gretna

Step 1: You call (504) 636-6074 or request a free estimate online. We schedule an on-site assessment at your Gretna property, where we inspect the roof, deck, flashing, and drainage, and we discuss your goals and budget. You get a written scope and a clear price before any work begins.

Step 2: Once you approve, we pull the required permits through the local building department and coordinate any HOA or historic review. On installation day, our insured crew protects your landscaping and handles the tight access that is common on Gretna lots, whether that means staging materials on the street or using a conveyor to reach a steep pitch. We keep you informed at every stage.

Step 3: When the work is done, we clean the site thoroughly, haul away all debris, and walk the roof with you to make sure you are satisfied. We leave your property clean and your roof ready for the next storm season.

Pricing in Gretna depends on the size and pitch of your roof, the condition of the decking, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. Retrofit over existing shingles starts at $7 per square foot, while corrugated and ribbed panel roofing starts at $5.50 per square foot. For repairs, metal roof leak repair starts at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight repair at $600. We give free estimates and explain exactly what drives the cost for your specific Gretna home, so call (504) 636-6074 to schedule yours.

My Gretna cottage has an old 5V crimp roof with rusty screws. Can you repair it or does it need a full replacement?
That depends on the condition of the panels and the deck. If the metal is still sound and the leaks are coming from failed fasteners or worn washers, we can often replace the screws and re-seal the penetrations for a fraction of the cost of a new roof. If the panels are rusted through or the deck has soft spots, a replacement or retrofit may be the better long-term investment. We inspect and give you an honest assessment.
A storm just blew through Gretna and lifted some panels on my roof. How fast can you respond?
We prioritize storm and wind damage calls in Gretna and the surrounding West Bank. Call (504) 636-6074 and we will schedule a free inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the roof to prevent further water intrusion and then provide a repair estimate.
What is the typical cost to repair a metal roof leak in Gretna?
Most metal roof leak repairs start at $450, but the final price depends on the source of the leak, the type of metal, and how accessible the area is. A simple fastener leak costs less than a separated seam or flashing repair. We give you a firm quote after inspecting the roof, and we never add surprise charges.
Do I need a permit to replace my roof in Gretna, and how does that work?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Gretna and Jefferson Parish. The exact thresholds, fees, and inspection requirements vary, so we always verify with the local building department before starting work. We handle the permit application and inspections as part of our service, so you do not have to navigate the process alone.
My neighbor's oak tree drops limbs on my roof, and my HOA has strict rules about metal roofs. Can you help with approval?
We can provide product specifications, color samples, and installation details that your HOA or historic district review board may require. We are familiar with the design guidelines common in Gretna, and we can adjust the panel profile and color to meet them. If a limb from a neighbor's tree damages your roof, we can document the damage for insurance purposes, but property line disputes are a civil matter between neighbors.
Are you fully insured for work on my Gretna property?
Yes, we carry general liability insurance and workers' compensation coverage for every job.
What maintenance should I do on my metal roof in Gretna to prevent problems during hurricane season?
Before storm season, check for loose or missing screws, lift any debris from the roof and gutters, and look for signs of rust or sealant wear around flashing and penetrations. After a storm, inspect for lifted panels or dents from limbs. We offer free inspections and can replace worn screws and re-seal flashing to keep your roof ready for the next system that comes through.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm