Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Westwego, LA (70115) · Local Professionals

New Orleans Metal Roofing · Fast response in Westwego and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Westwego is a working river town where the streets run right up to the levee and the houses have been holding their own against Gulf humidity for generations. You see it in the mix of older raised cottages, brick ranches, and rebuilt elevated homes, many with low-pitched roofs that take a beating from summer storms and salt-heavy air coming off the Mississippi. If you live near the Westwego Farmers and Fisheries Market or along the Avenue, you already know how fast a loose fastener can turn into a ceiling stain.

Homeowners in Westwego (70115) call New Orleans Metal Roofing because we understand what this side of the river does to a roof. We are based in New Orleans, fully insured, and we handle everything from screw replacement and re-fastening to full standing seam installations. When the wind rips a panel loose after a squall, or you are tired of patching shingles every year, we give you a straight answer and a written estimate.

Metal Roofing in Westwego (70115)

The ground here is flat and low, tucked between the river and the lake, and that shapes how we work. Many lots are narrow with the house close to the property line, so staging materials and getting a crew safely onto a low-slope roof takes planning. Older homes often have multiple roof layers, which means we have to check the decking before we talk about a retrofit. The humid air and salt influence from the river speed up corrosion on fasteners and edge metal, so we pay close attention to screw condition, flashing details, and the way panels are fastened at the eaves and ridges. After a storm, we see wind-lifted panels, separated seams, and punctures from fallen oak limbs, and we fix those with the same care we bring to a new install.

Our team has worked on Westwego homes and commercial buildings long enough to know the local building stock. Whether it is a raised bungalow near the levee, a brick ranch off the Westbank Expressway, or a metal roof that just needs a coating to get a few more years, we bring the right approach and the right materials.

Our services in Westwego

How a Job Works in Westwego

Step 1: You call us at (504) 636-6074 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic if accessible, and look at fasteners, seams, flashing, and drainage. We explain what we find in plain language and give you a written scope and price before any work begins.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the work. On tight Westwego lots, we plan material delivery and dumpster placement so we do not block your neighbor's driveway or the street. If your home is in a historic district or under an HOA, we help you understand the design review requirements before we order panels. Our crews are fully insured, and we keep the job site organized from tear-off to final panel.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old materials, magnet-sweep for nails, and make sure gutters and downspouts are clear. You get a chance to inspect the finished work with us, and we do not leave until you are satisfied.

Pricing in Westwego depends on the size and pitch of your roof, how many layers are already there, access around the house, and whether we are repairing or replacing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Smaller jobs like metal roof repair or leak repair start at $450, screw replacement and re-fastening at $750, and coating or painting at $2.50 per square foot. Flashing and chimney repair starts at $600, and gutters for metal roofs start at $9 per linear foot. We give free estimates, so call (504) 636-6074 and we will walk your roof and put together a clear number.

My house is a raised cottage near the levee in Westwego, and the roof is original 5V crimp. Can you match that profile or should I switch to standing seam?
We see a lot of older 5V crimp on raised cottages around Westwego, and matching it exactly depends on the panel width and gauge that is up there now. In many cases we can source a similar profile, but if the old panels are failing at the fasteners, switching to standing seam gives you a more weathertight roof with hidden fasteners. We will walk your roof, measure the existing panels, and give you both options with pricing so you can decide.
A storm just peeled back some panels on my roof off the Westbank Expressway. How fast can you get out for an emergency repair?
We prioritize storm and wind damage calls in Westwego and the surrounding area. Call (504) 636-6074 and we will schedule the earliest available inspection, often same or next day depending on call volume. We can tarp or secure the area to prevent further water intrusion, then give you a written repair estimate. We document the damage for insurance purposes, though coverage and deductibles are set by your policy.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Westwego?
For a 1,500 square foot ranch with a low-slope roof, a metal roof replacement typically falls in the range of $13,500 to $18,000 depending on panel type, tear-off of existing layers, and access. Standing seam runs higher than corrugated or ribbed panel. We provide a free on-site estimate so you get a real number based on your roof, not a guess.
Do I need a permit to replace my roof in Westwego, and who handles that?
Roofing permits are commonly required for a full replacement or re-roof in Westwego, and the rules on layers, inspections, and fees are set by the local building department. We verify the current requirements with the city before we start and pull the permit as part of the job. If your home is in a historic district, there may be additional design review, and we help you navigate that process.
My neighbor's oak tree drops limbs on my roof, and my HOA has rules about roof color. Can you help with approval?
Yes. We can provide panel samples and manufacturer spec sheets for your HOA review, and we are familiar with common color restrictions in the area. On property lines, we stay within your lot and coordinate with neighbors on access if we need to stage materials. If a limb has punctured a panel, we repair that too, and we can recommend tree trimming to reduce future damage.
Are you insured for work on my Westwego property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on my metal roof in Westwego between storms?
Check your fasteners and seams after any major wind event, and look for lifted panels or loose screws at the eaves and ridges. Keep gutters clear of oak leaves and magnolia debris, especially before hurricane season. A coating every several years helps protect against humidity and salt air. We offer free inspections and can set up a maintenance plan if you want us to handle it.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm