Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Marrero, LA (70115) · Local Professionals

New Orleans Metal Roofing · Fast response in Marrero and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Marrero is the kind of West Bank community where ranch homes and small commercial buildings sit on generous lots, many of them built in the post-war boom and now wearing roofs that have seen decades of sun and storm. If you live off Barataria Boulevard or near the West Bank Expressway, you know the look: low-pitched shingle roofs that have taken a beating from summer thunderstorms and hurricane wind.

Homeowners in Marrero (70115) call New Orleans Metal Roofing because we understand how this climate treats a roof. Between the intense sun, the humidity that feeds algae and mildew, and the wind-driven rain from tropical systems, a roof here has to be more than just shingles.

Metal Roofing in Marrero (70115)

Marrero's terrain is flat and low, with a mix of older ranch homes, raised bungalows, and small commercial buildings. Many properties have tight side yards and mature trees, including live oaks and crape myrtles, which can drop limbs and shade roofs in ways that promote mildew. The soil is often clay-heavy, which can affect drainage around the foundation and roof runoff. We account for these local conditions by recommending metal roofing systems that resist wind uplift and shed water quickly, and by paying attention to flashing details at chimneys, skylights, and wall intersections. For commercial and agricultural buildings, we understand the need for durable, low-maintenance roofing that can handle the heat and occasional hail.

Our team has worked throughout New Orleans and the surrounding areas, including Marrero, Gretna, and Algiers. We know the local building department requirements and can help you navigate permits and inspections. Whether you need a new standing seam roof, a repair after a storm, or a coating to extend the life of an existing metal roof, we bring the experience and equipment to get it done right.

Our services in Marrero

How a Job Works in Marrero

Step 1: You call us at (504) 636-6074 or request a free estimate online. We schedule an on-site assessment at your convenience, where we inspect your current roof, discuss your needs, and provide a detailed written estimate. We will also advise you on permit requirements and any HOA or historic district considerations if applicable.

Step 2: Once you approve the estimate, we schedule the work. Our crews are experienced with the tight lot access common in Marrero neighborhoods and will take care to protect your landscaping and property. We handle the permit application and coordinate inspections as required by the local building department. For commercial projects, we can work around your business hours to minimize disruption.

Step 3: After the job is complete, we clean up thoroughly, removing all debris and materials. We walk through the finished work with you to ensure you are satisfied and answer any questions. We leave your property clean and your new roof ready to protect your home or business for years to come.

Pricing for metal roofing in Marrero depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. We also offer coating and painting from $2.50 per square foot, which can extend the life of an existing metal roof. For a precise quote, call us at (504) 636-6074 to schedule a free estimate. We will assess your roof and provide a clear, no-obligation price.

My ranch home near the West Bank Expressway has a low-pitched roof. Can metal roofing work on it?
Yes, metal roofing is an excellent choice for low-pitched roofs, but the panel profile and installation method matter. We often recommend standing seam or corrugated panels with proper underlayment to ensure watertight performance. We will evaluate your roof's slope and condition during the free estimate and recommend the best system for your home.
A storm just knocked limbs onto my roof in Marrero. How quickly can you respond for emergency repair?
We prioritize storm damage calls and can often provide same-day or next-day inspections. Call us at (504) 636-6074 to schedule an assessment. We will tarp or secure any active leaks if needed and provide a detailed repair estimate. We work with insurance claims and can document the damage for your claim.
What does a typical metal roof replacement cost for a 1,500-square-foot ranch home in Marrero?
For a 1,500-square-foot home, a metal roof replacement typically ranges from $13,500 to $15,000 for standard metal roofing, depending on the material and complexity. Standing seam or stone-coated steel may be higher. We provide free estimates so you can get an accurate price for your specific roof.
Do I need a permit to replace my roof in Marrero, and can you help with that?
Yes, roofing permits are generally required for a full replacement in Marrero. The exact requirements and fees are set by the local building department, and we can handle the permit application and coordinate inspections for you. We will advise you on what is needed based on your project.
My neighbor's tree hangs over my property line. Can I trim it to install a metal roof?
Property line and tree trimming laws can be complex. In general, you have the right to trim branches that overhang your property, but it is best to check with your neighbor and local regulations first. We can advise on roof installation clearance and work with you to ensure a smooth process. For HOA properties, check any rules about exterior changes before proceeding.
Are you fully insured for roofing work in Marrero?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of any accidents during the project.
How often should I inspect my metal roof in Marrero's climate?
We recommend an annual inspection, especially after storm season. Look for loose fasteners, debris accumulation, and signs of leaks. We offer free estimates for inspections and can perform routine maintenance to extend the life of your roof. Keeping gutters clean and trimming overhanging branches also helps prevent problems.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm