Metal roofing prices in New Orleans vary based on material, roof complexity, and project scope, with installation starting at $8 per square foot and repairs from $450. Understanding these factors helps you budget confidently, and we're here to guide you toward the right solution for your home.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across New Orleans and the Northshore: panel systems engineered for hurricane-season wind and long, humid summers, installed over high-temperature synthetic underlayment with proper ventilation and carefully lapped flashing for a long service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, a premium choice for New Orleans homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to back out in tropical storm wind, superior uplift resistance and a cool reflective finish for the Gulf summer. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of storm-worn shingle, cracked slate or end-of-life metal roofs: old roofing hauled away, decking inspected for rot and repaired, then a complete new metal system installed. Many Louisiana carriers recognize wind-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing composition shingles with no tear-off, less waste and lower cost. Popular on New Orleans ranch homes. We check deck condition and moisture first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing dented or lifted panels, resealing seams and penetrations, and fixing failed flashing before the next tropical downpour becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and chimney transitions) and fixed right, not just caulked over. Emergency tarping available after summer thunderstorms and tropical systems. |
| Screw Replacement & Re-Fastening | From $750 | New Orleans' humidity, heat swings and storm wind loosen screws and rot washers on older exposed-fastener roofs, especially crimp-panel shotgun roofs. Oversized corrosion-resistant screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (5V crimp, corrugated and R-panel) is a classic New Orleans choice for shotguns, cottages, porches, sheds and workshops. Quality panels in reflective colors, installed with proper screw patterns and closures that keep out wind-driven rain. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that give the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for New Orleans homeowners who want metal performance without the standing seam look. Lightweight, walkable and wind-rated for hurricane gusts. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: excellent wind and impact performance, a Class A fire rating, and profiles that mimic the slate and shake looks found on historic New Orleans homes, at far lighter weight than slate. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, galleries, dormers, bay windows and full architectural roofs: premium metals that weather to a living patina and fit New Orleans' historic character. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust and mildew treatment and high-performance reflective coating systems that extend roof life, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, dormers and parapet walls, the number one leak point on New Orleans roofs when summer downpours hit. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | New Orleans never needs snow guards, so this service is about what does apply here: wind-uplift fastening and edge and ridge reinforcement for hurricane gusts, plus reflective coatings that shed summer heat. Honest guidance on whether your roof needs any of it. |
| Storm & Wind Damage Repair | Free inspection | Repair of wind, hail and hurricane damage to metal roofing: thorough documentation with photos, an honest assessment of repair vs. replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating, rust and algae growth, plus a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden Gulf cloudbursts away from foundations and low, flood-prone lots, with details that handle oak leaves and debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for warehouses, workshops, churches, carports and light commercial buildings across Jefferson Parish and the West Bank, from riverfront industrial buildings to Northshore farm and horse barns, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs require more materials and labor, while complex designs with multiple slopes, valleys, or penetrations increase installation time and cost.
- Material type and gauge : Standing seam, corrugated panels, metal shingles, and copper vary significantly in price per square foot, with thicker gauges and premium finishes costing more.
- Accessibility and roof height : Steep roofs, multi-story homes, or limited access can require additional safety measures and labor, affecting the overall price.
- Removal and disposal of old roofing : If your project involves tearing off existing shingles or metal, the cost includes labor and disposal fees, which can add to the total.
What's included
- Travel included across the New Orleans area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage, pitch, and material preference ready before calling (504) 636-6074. Our estimates include a detailed breakdown of materials, labor, and any additional services like flashing or gutter work, ensuring transparency. Schedule a free inspection to discuss your project and receive a written quote tailored to your home.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary due to material choice (e.g., corrugated panels start at $5.50/sq ft, while copper starts at $20/sq ft), roof complexity, labor, and whether removal of old roofing is needed. We provide itemized estimates so you know exactly what you're paying for.
Do you offer free estimates?
Yes, we provide free inspections and estimates for most services, including storm damage repair and commercial projects. Call (504) 636-6074 to schedule your appointment.
What payment methods do you accept?
We accept cash, checks, and major credit cards. Financing options may be available for larger projects; please ask during your estimate for details.