Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Slidell, LA (70458) · Local Professionals

New Orleans Metal Roofing · Fast response in Slidell and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Slidell is a pine-lot town, and that changes everything about roofing here. The lots off Gause Boulevard and Brownswitch Road are big and shaded, with tall pines and oaks that drop limbs on low-pitch shingle roofs every time a summer storm rolls through. Homes in the 70458 ZIP, from the older ranches near Olde Towne to the brick subdivisions off Robert Boulevard, take a beating from wind-driven rain and humid air that never lets up.

When homeowners in Slidell call New Orleans Metal Roofing, it is usually because a shingle roof has started to fail after one too many storms. We install, repair, and replace metal roofs built for Northshore weather, and we know the difference between a quick patch and a fix that lasts. From the first free inspection to the final walkthrough, our insured crews treat your property like it is in our own neighborhood.

Metal Roofing in Slidell (70458)

Slidell sits on the Northshore, north of Lake Pontchartrain, where the ground is sandy and the tree canopy is thick. That combination creates two problems you do not see everywhere: falling limbs that puncture or dent panels, and debris that clogs gutters and traps moisture against fasteners. Many homes here are single-story ranches or raised bungalows with low-pitched roofs, which are prime candidates for standing seam or stone-coated steel. The older parts of town, near Olde Towne and along Front Street, have smaller lots and tighter access, so we plan staging carefully and often use compact equipment to avoid tearing up lawns. Newer subdivisions off Airport Road and Highway 190 have HOA rules that can restrict panel profiles and colors, so we check those before ordering materials.

Our team has worked across the New Orleans area, from the historic districts to the Northshore, and we understand how humidity and storm wind affect metal roofing. We use fasteners and flashing details rated for high wind, and we seal every penetration to keep wind-driven rain out. If you are in Slidell and your roof is showing its age, we can tell you whether a repair, a retrofit over shingles, or a full replacement makes the most sense.

Our services in Slidell

How a Job Works in Slidell

Step 1: You call (504) 636-6074 or request a free estimate online. We schedule an on-site assessment at your Slidell property, usually within a few days. We inspect the roof, check the attic if accessible, and look at flashing, fasteners, and drainage. You get a written scope and a clear price before any work begins.

Step 2: Once you approve, we pull the required roofing permit from the local building department. Slidell and St. Tammany Parish have their own permit rules, and we handle the paperwork. On installation day, our crew protects landscaping, sets up safe access, and removes the old roofing if needed. For tight lots near Olde Towne, we plan material drops to avoid blocking driveways. If your subdivision has an HOA, we coordinate color and profile approvals ahead of time.

Step 3: We clean the site daily and do a final walkthrough with you. We haul away all debris, use a magnet to pick up stray fasteners, and make sure gutters and downspouts are clear. You get a warranty packet and our contact information for any follow-up questions. We do not consider the job done until you are satisfied.

Pricing for metal roofing in Slidell depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts at $7 per square foot, and standing seam starts at $10 per square foot. Stone-coated steel and metal shingle roofing both start at $9 per square foot. For repairs, metal roof leak repair starts at $450, and screw replacement and re-fastening starts at $750. Storm and wind damage inspections are free. The key cost factors are roof size, access (tight lots and steep pitches add labor), the condition of the existing roof, and how soon you need the work done. Call (504) 636-6074 for a free estimate tailored to your Slidell home.

My Slidell home is surrounded by pines and oaks. Will a metal roof stand up to falling limbs better than shingles?
Yes, generally. Metal panels, especially standing seam and stone-coated steel, resist impact better than asphalt shingles. A heavy limb can still dent or puncture a panel, but it is usually repairable without replacing the whole roof. We recommend trimming overhanging branches and keeping gutters clear to reduce risk. If a limb does cause damage, we can replace individual panels or sections.
A storm just knocked down limbs and peeled back part of my roof in Slidell. How fast can you respond?
We prioritize storm and wind damage calls in Slidell and the surrounding area. Call (504) 636-6074 and we will schedule a free inspection, often within 24 to 48 hours depending on demand. We can tarp or secure the roof to prevent further water damage, then provide a repair estimate. We also document damage for insurance claims if needed.
What does a typical metal roof replacement cost in Slidell, and what affects the price?
Most full replacements run between $9 and $14 per square foot installed, depending on material and complexity. A simple ranch roof with good access is on the lower end; a steep, cut-up roof with dormers or tight lot access is higher. Retrofit over existing shingles can save money at around $7 per square foot. We give you a firm quote after inspecting your roof.
Do I need a permit to replace my roof in Slidell, and who handles it?
Yes, a roofing permit is typically required for a full replacement or re-roof in Slidell and St. Tammany Parish. Requirements and fees vary, so we verify with the local building department before starting. We pull the permit and schedule inspections as part of our service. If your home is in a historic district, additional design review may apply.
My neighbor's tree hangs over my roof in Slidell. Can I trim it, and will my HOA care about the new roof color?
In Louisiana, you generally have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first. For HOA rules, many Slidell subdivisions require approval of roof color and material. We can provide product specifications and color samples to submit to your HOA before installation.
Are you fully insured for roofing work at my Slidell property?
Yes. We carry general liability insurance and workers' compensation coverage for all crew members. This protects you from liability if someone is injured or property is damaged during the job.
What maintenance does a metal roof need in Slidell's humid climate?
Inspect your roof twice a year, especially after storm season. Check for loose or backed-out fasteners, debris in gutters, and any signs of rust or sealant failure. Wash off mildew and pine sap occasionally with a garden hose. We offer maintenance inspections and can replace worn fasteners or re-apply sealant to keep your roof performing.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm