Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Mandeville, LA (70471) · Local Professionals

New Orleans Metal Roofing · Fast response in Mandeville and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Mandeville is a city of raised homes tucked under live oaks and pines, where the lakefront breeze meets the shade of old trees. From the historic cottages near the lake to the newer subdivisions off Highway 190, roofs here take a beating from limb fall and damp air. If you live in 70471, you know the drill: one good storm can send a branch through a shingle roof, and the humidity never lets up.

That's why homeowners in Mandeville call New Orleans Metal Roofing. We've worked on homes near Fontainebleau State Park and along the Mandeville lakefront, and we understand the specific challenges of roofing here. Whether it's a standing seam installation on a raised center-hall home or a coating job on a camp, we bring insured crews and local know-how to every job.

Metal Roofing in Mandeville (70471)

Mandeville sits on the north shore of Lake Pontchartrain, and the combination of mature trees and lakefront humidity creates unique roofing conditions. Many homes here are raised, with steep pitches and complex rooflines that require careful flashing and fastening. The soil is often sandy and drains quickly, but the real challenge is overhead: live oak and pine limbs that drop without warning. We've replaced panels punctured by falling branches and repaired seams that pulled apart after a storm. The damp air also accelerates corrosion on fasteners, so we use corrosion-resistant screws and recommend regular inspections.

Our team has been serving Mandeville and the greater New Orleans area for years. We know the building styles, from the older cottages near the lake to the newer construction off LA-22, and we tailor each metal roofing project to the specific needs of the property.

Our services in Mandeville

How a Job Works in Mandeville

Step 1: Call us at (504) 636-6074 or fill out our contact form to schedule a free on-site assessment. We'll inspect your roof, discuss your options, and provide a written estimate. We'll also check for any HOA requirements or permit needs specific to your Mandeville neighborhood.

Step 2: Once you approve the estimate, we schedule the work. For many Mandeville homes, access can be tight, especially on lots with mature trees and narrow driveways. We plan accordingly, using the right equipment to safely navigate your property. If permits are required, we handle the paperwork and coordinate with the local building department.

Step 3: After the job is complete, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the property with you to ensure everything meets your satisfaction. We leave your yard clean and your roof ready to handle whatever Mandeville weather brings.

Metal roofing costs in Mandeville vary based on the size and complexity of your roof, the material you choose, and the condition of your existing roof. For example, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof repair at $450. Coating and painting start at $2.50 per square foot, which is a cost-effective way to extend the life of an existing metal roof. We provide free estimates and will give you a clear, detailed quote with no surprises. Call (504) 636-6074 to schedule yours.

My house in Mandeville is surrounded by live oaks. How do I protect my metal roof from falling limbs?
Falling limbs are a real concern here. We recommend regular tree maintenance and a roof inspection after major storms. If a limb does damage your roof, we can repair punctures and replace panels. We also install snow guards (though snow is rare here, they help with debris) and can add protective coatings to increase impact resistance.
A storm just knocked down a tree on my roof in Mandeville. How quickly can you respond?
We offer emergency storm and wind damage repair with free inspections. Call us at (504) 636-6074, and we'll prioritize your call. We can tarp the roof to prevent further water damage and schedule permanent repairs as soon as possible.
What's the typical cost for a metal roof replacement on a 2,000 square foot home in Mandeville?
For a 2,000 square foot home, a metal roof replacement typically ranges from $18,000 to $24,000 for standing seam, depending on pitch, complexity, and material. Corrugated panels might be less, around $11,000 to $16,000. We provide free estimates to give you an accurate number.
Do I need a permit for a metal roof in Mandeville, and what does the process involve?
Yes, roofing permits are generally required for replacements in Mandeville. The permit process involves submitting plans and paying a fee, and inspections are required. We handle the permitting for you and ensure all work meets local building codes. Requirements can vary, so we always verify with the city.
My HOA has strict rules about roof color. Can you help with approval?
Absolutely. We're familiar with HOA requirements in Mandeville and can provide color samples and documentation to help you get approval. We'll coordinate with your HOA to ensure the chosen metal roofing meets their guidelines. If there's a property line issue, we can also discuss setbacks and neighbor considerations.
Are you insured for roofing work in Mandeville?
Yes, we are fully insured with general liability and workers' compensation coverage. Your property and our crew are protected.
What maintenance does a metal roof need in Mandeville's humid climate?
In Mandeville's humidity, we recommend annual inspections to check fasteners and seams, and cleaning to remove debris. Coating your roof every 10-15 years can extend its life. We offer maintenance plans and free inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm