Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Harvey, LA (70058) · Local Professionals

New Orleans Metal Roofing · Fast response in Harvey and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Harvey is a working-class West Bank community where ranch homes and industrial buildings sit close to the canals and the levee, and the afternoon storms roll in off the Gulf like clockwork. If your roof is showing its age, we install, repair, and replace metal roofing built for this exact climate.

Homeowners in 70058 call New Orleans Metal Roofing because we understand the mix of low-pitched ranch roofs and older canal-front properties here, and we know how to stop the leaks that show up after a heavy summer downpour. From the streets near the Harvey Canal to the neighborhoods off Lapalco Boulevard, our crews are local and fully insured.

Metal Roofing in Harvey (70058)

Harvey sits on the West Bank between the Mississippi River and the wetlands, and most of the housing stock is post-war brick ranches on slab foundations with low-pitched roofs. That low slope is a problem when the summer thunderstorms dump two inches in an hour, because shingles and old fasteners can't always keep up. Add the industrial buildings and warehouses near the canals, and you get a mix of roof types that need different approaches: corrugated and ribbed panels for the commercial side, standing seam or metal shingles for the homes. The flat terrain means water drains slowly, so we pay close attention to flashing, gutter sizing, and panel overlap to keep wind-driven rain out. The heat and humidity also breed algae and mildew on older roofs, which is one reason metal roofing has become so popular here.

Our team has worked on ranches in Harvey Terrace, raised homes near the canal, and metal roofs on commercial properties along the West Bank. We know the local building department's permit process and can help you navigate it.

Our services in Harvey

How a Job Works in Harvey

Step 1: You call us at (504) 636-6074 or request a free estimate online. We schedule an on-site assessment at your Harvey property, usually within a day or two. We inspect the roof, check the attic if accessible, and talk with you about what you're seeing: leaks, rust, loose panels, or storm damage. You get a written estimate with options, not pressure.

Step 2: Once you approve, we pull the required permits from the local building department and schedule the work. For a typical ranch home, a metal roof installation takes a few days, depending on the size and complexity. We protect your landscaping and coordinate with any HOA requirements. If your property has tight access or is on a canal lot, we plan for that upfront.

Step 3: After the work is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you're satisfied. We don't leave until you've signed off and your questions are answered.

Pricing for metal roofing in Harvey depends on the size of your roof, the material you choose, and the condition of the existing structure. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. Metal roof repair starts at $450, and leak repair also starts at $450. For a typical ranch home, a full replacement might range from $9,000 to $20,000 or more, depending on square footage and material. Access, roof pitch, and whether we're going over existing shingles or doing a tear-off all affect the final number. Call us at (504) 636-6074 for a free, no-obligation estimate tailored to your Harvey property.

My ranch home in Harvey has a low-pitch roof and leaks near the chimney after heavy rain. Can metal roofing fix that?
Yes. Low-slope roofs are common in Harvey, and we often recommend standing seam or corrugated panels with proper flashing and sealant at the chimney and valleys. We'll inspect the leak source and design a metal system that sheds water effectively, even in our intense thunderstorms.
A storm just peeled back some panels on my warehouse near the Harvey Canal. How fast can you respond?
We offer free storm damage inspections and prioritize emergency repairs. Call (504) 636-6074 and we'll schedule an assessment as soon as possible, often within 24 hours. We can tarp or secure the roof temporarily and provide a repair estimate.
What does a metal roof replacement cost for a typical three-bedroom ranch in 70058?
Most ranch homes in Harvey have roofs between 1,500 and 2,500 square feet. At our starting prices, a replacement with corrugated panels could run $8,000 to $14,000, while standing seam might be $15,000 to $25,000. The exact cost depends on tear-off, decking condition, and accessories. We give free estimates.
Do I need a permit to replace my roof in Harvey, and can you handle it?
Yes, roofing permits are typically required for replacements in Harvey. The rules vary by jurisdiction, so we confirm with the local building department before starting. We handle the permit application and inspections for you.
My neighbor's oak tree drops limbs on my roof. What are my responsibilities if a limb damages my metal roof?
In Louisiana, you're generally responsible for what falls on your property, but if the tree is clearly dead or diseased and the neighbor knew it, liability can shift. We recommend documenting the damage and filing a claim with your insurer. We can provide a detailed inspection report for your claim.
Are you fully insured for roofing work in Harvey?
Yes. We carry general liability insurance and workers' compensation coverage for all our crews.
What maintenance does a metal roof need in Harvey's humid climate?
We recommend an annual inspection, especially after hurricane season. Check for loose fasteners, debris in gutters, and any signs of rust or sealant wear. A coating or paint every 10 to 15 years can extend the life of the roof. We offer maintenance plans.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm