Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Harahan, LA (70123) · Local Professionals

New Orleans Metal Roofing · Fast response in Harahan and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Harahan is a small, tight-knit city wedged between the Mississippi River and Lake Pontchartrain, just west of New Orleans. The tidy brick ranches and low-slung homes along Jefferson Highway and Hickory Avenue mostly went up in the 1950s and 60s, and many still carry their original shingle roofs, now well past their prime in this heat and humidity. If you live near Harahan Playground or the Elmwood industrial corridor, you know how fast a summer storm can push water under a tired roof.

That is why homeowners in Harahan (70123) call New Orleans Metal Roofing. We know the aging shingle roofs here, the low pitches, the tight lots, and the way wind-driven rain sneaks in around chimneys and vents. We are fully insured, local, and we specialize in metal roof replacement and gutters that actually handle our rainfall.

Metal Roofing in Harahan (70123)

Harahan sits on flat ground that drains slowly after a heavy rain, and many of these post-war brick ranches have low-slope roofs that were never designed for today's storm intensity. The original shingles are often brittle, granule-depleted, and prone to wind uplift at the edges. We see a lot of failed fasteners, rusted valleys, and flashing gaps around chimneys and skylights. Because lots are narrow and homes sit close together, access can be tight, and we plan material staging carefully so we do not tear up your lawn or block your neighbor's driveway. The older trees, live oaks and crape myrtles, drop limbs and fill gutters, which is why we often recommend gutter guards or larger downspouts when we install a new metal roof.

Our team has worked throughout Harahan and the surrounding New Orleans area, from the streets near Harahan Elementary to the commercial buildings along Jefferson Highway. We understand the local building stock and the specific ways metal roofing solves problems here: standing seam and corrugated panels shed water fast, resist wind, and reflect summer heat. We also handle the details that matter, like proper underlayment, ice and water shield at the eaves, and ventilation, so your new roof performs for decades.

Our services in Harahan

How a Job Works in Harahan

Step 1: You call us at (504) 636-6074 or request a free estimate online. We schedule an on-site assessment at your Harahan property, usually within a day or two. We inspect your existing roof, attic, flashing, and gutters, and we talk through your options, whether that is a repair, a full replacement, or a metal roof over your current shingles. You get a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we pull the required permits with the City of Harahan and schedule the work. On installation day, our crew arrives early, protects your landscaping, and sets up a safe staging area. Because many Harahan lots are tight, we coordinate with you on where to place materials and the dumpster. We remove the old roof, inspect the decking, and install your new metal roof system according to manufacturer specs. If your home is in a historic overlay or HOA, we help you submit the paperwork for color and profile approval.

Step 3: When the job is done, we clean up thoroughly, magnet-sweep for nails, and walk the property with you. We do not leave until you are satisfied and understand how to care for your new roof. We also provide documentation for your insurance company if the work is part of a storm claim.

Pricing for metal roofing in Harahan depends on the size and pitch of your roof, the condition of the decking, access, and the material you choose. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. If you want to go over your existing shingles, that retrofit starts at $7 per square foot, but keep in mind local code limits how many layers you can have. Repairs start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. We always provide a free, detailed estimate so you know exactly what your job will cost. Call (504) 636-6074 to schedule yours.

My Harahan ranch has a low-pitch roof and the shingles keep blowing off near the eaves. Can a metal roof fix that?
Yes. Low-slope roofs in Harahan are prone to wind uplift, especially at the edges. A standing seam or corrugated metal roof with proper fastening and edge metal will handle our storm winds much better than shingles. We also check your decking and underlayment to make sure the new roof has a solid base.
A storm just peeled back some panels on my metal roof in Harahan. How fast can you get out here?
We prioritize storm damage calls in Harahan and the surrounding area. Call us at (504) 636-6074 and we will schedule an inspection, usually within 24 hours. We can tarp or secure the roof to prevent further water damage and then provide a repair estimate.
What is a realistic budget for replacing a 1,500-square-foot shingle roof with metal in Harahan?
For a typical 1,500-square-foot roof, a basic corrugated or ribbed panel roof might start around $8,000 to $12,000, while standing seam could run $15,000 to $20,000 or more depending on complexity. Factors like roof pitch, number of penetrations, and whether we need to replace decking will affect the final price. We give you a firm quote after a free inspection.
Do I need a permit from the City of Harahan to replace my roof?
Yes, the City of Harahan requires a permit for a full roof replacement, and the requirements can vary. We handle the permitting process for you, including submitting plans and scheduling inspections. We always defer to the local building department for the final say on rules.
My neighbor's oak tree drops limbs on my roof, and my HOA has rules about roof color. Can you help with both?
We can help with the tree limbs by inspecting for damage and recommending a roof that resists impacts, like stone-coated steel or metal shingle. For HOA approval, we provide color samples and documentation to submit to your board. We also respect property lines and coordinate with neighbors on staging and cleanup.
Are you fully insured for roofing work in Harahan?
Yes, we carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
What maintenance does a metal roof need in Harahan's humid climate?
Metal roofs are low maintenance, but in our humidity, we recommend an annual inspection to check for loose fasteners, debris in valleys, and any signs of corrosion. We also suggest keeping gutters clear and trimming tree branches away from the roof. A coating every 10 to 15 years can extend the life of painted panels.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm