
Metal Shingle Roofing in New Orleans
If you want the look of architectural shingles, slate, or cedar shake but the wind and hail performance of steel, Metal Shingle Roofing in New Orleans is the roof that fits both the architecture and the weather. Our crews install, repair, and replace metal shingle systems on shotgun houses, camelbacks, raised bungalows, and post-war ranches from the Marigny to Lakeview and across the river to Gretna and Marrero. These panels are lightweight, walkable for service, and rated for the hurricane gusts that funnel up the Mississippi River crescent. Call (504) 636-6074 for a free estimate. If you are also weighing profiles, see our standing seam metal roofing page for a side-by-side comparison.
Why Metal Shingle Roofing Matters on New Orleans Homes
New Orleans sits below sea level between the river and Lake Pontchartrain, under a subtropical climate that throws long soaking thunderstorms, tropical systems, and intense summer sun at every roof. The failure mode that dominates here is wind-driven rain pushing under and around fasteners and flashing, not snow load. Metal shingles interlock and lock down with concealed fasteners, so they resist uplift far better than three-tab or architectural asphalt. On a 1920s raised bungalow in Carrollton or a camelback in Mid-City, that means fewer emergency tarp calls after a named storm.
- Metal shingles shed wind-driven rain and resist algae and mildew staining in the humidity.
- They weigh a fraction of asphalt and slate, which matters on older Creole cottages and Greek Revival townhouses with original framing.
- They are walkable, so future repairs and gutter service do not require special equipment.
- They carry wind ratings that meet or exceed what insurers want to see on a Louisiana policy.
- They come in slate, shake, and architectural shingle profiles that fit historic district design review.
For homeowners in the Garden District, Bywater, or Treme, the profile and color choices matter as much as the steel itself, and we walk you through both.
Key info: On a raised center-hall home in the Irish Channel, we replaced a tired asphalt shingle roof with a slate-profile metal shingle system in a charcoal finish. The homeowner kept the historic look and gained a roof rated for the wind gusts that come with a Gulf hurricane. Review the permit rules with the City of New Orleans One Stop Shop before any re-roof.
How We Install Metal Shingle Roofing in New Orleans
Every metal shingle job starts with a full tear-off and deck inspection, because we will not hide soft sheathing or old flashing under a new roof. We check the decking, replace rotten boards, and install a high-temp underlayment rated for the Louisiana sun. Then we set the starter course, lay the shingles in the manufacturer's pattern, and finish the hips, ridges, and valleys with matching trim. On historic homes we match the existing eave and rake details so the new roof looks original from the street.
- We inspect the deck and framing and replace any soft or delaminated sheathing.
- We install synthetic underlayment and ice-and-water shield at valleys and penetrations.
- We set the starter course and lay metal shingles with concealed fasteners in the specified pattern.
- We fabricate and install ridge caps, hip caps, and valley metal on site for a tight fit.
- We flash the chimney, skylights, and vent stacks and seal every penetration.
- We clean the gutters and haul away all old roofing debris.
If your home is in Metairie or Kenner and needs a full replacement, see our metal roof replacement page for the tear-off and disposal details.
Key info: On a low-pitch brick ranch in Lakeview, we installed a shake-profile metal shingle roof over new synthetic underlayment after removing two layers of old asphalt. The homeowner picked a brown blend that matched the brick and cut summer attic heat noticeably.
Metal Shingle Roofing Approaches We Use
We match the panel system to the roof pitch, the neighborhood, and the budget. The table below shows the main approaches we install across New Orleans and the West Bank.
| Approach | Description | Best for |
|---|---|---|
| Slate-profile metal shingles | Interlocking steel shingles with a textured slate look and concealed fasteners. | Historic homes in the Garden District, Marigny, and Treme. |
| Shake-profile metal shingles | Steel panels stamped with a cedar shake grain and varied widths. | Raised bungalows in Carrollton and Broadmoor. |
| Architectural shingle profile | Metal shingles that mimic standard architectural asphalt tabs. | Post-war ranches in Lakeview, Gentilly, and Metairie. |
| Metal shingle over existing shingles | A retrofit that sets metal shingles over a prepared existing roof deck. | Homes with one layer of asphalt and sound decking. |
| Metal shingle repair and re-fastening | Replacing damaged shingles, resealing flashing, and re-fastening lifted panels. | Storm-damaged roofs in Chalmette, Arabi, and the East. |
We help you pick the profile that passes design review and fits the house, not just the one that is cheapest per square.
Metal Shingle Roofing Cost in New Orleans: What to Expect
Metal shingle roofing in New Orleans typically starts around $9 per square foot installed, and the final number depends on the profile, the pitch, the number of valleys and hips, and whether we tear off one layer or two. A simple gable ranch in Gentilly costs less per square than a hipped roof with multiple dormers in Uptown. Historic homes that need custom trim and color matching sit at the top of the range. We give you a written, itemized estimate before any work starts.
Getting two or three estimates is smart in this market. It keeps pricing honest and lets you compare the underlayment, the flashing details, and the warranty each contractor offers. Ask whether the price includes tear-off, deck repair, and disposal. For a full breakdown of materials and labor, see our metal roofing pricing page.
What to Look for in a Metal Shingle Roofing Contractor Near New Orleans
Hiring a roofer near New Orleans means checking more than the bid. Confirm the contractor pulls the permit and knows the historic district and HOA design review rules for your block. A crew that has worked in the Marigny and the Garden District will already know what the commissions look for.
- Verify the license and insurance before you sign anything.
- Get two or three written estimates with the same scope so you can compare.
- Ask for local references and photos of completed metal shingle roofs.
- Confirm who pulls the permit and who handles the inspection.
- Check that the HOA or historic district has approved the profile and color.
When you are ready, contact us and we will set up a free inspection and estimate.
Metal Shingle Roofing Near Me: What New Orleans Homeowners Should Know
When you search for metal shingle roofing near me, you want a local crew that can get to your roof after a storm and knows the building stock. New Orleans roofs take a beating from summer sun, humidity, and wind-driven rain, and oak limbs fall on roofs in Broadmoor and along the park. We handle repairs, re-fastening, and full replacements across the metro. If your roof is leaking now, call (504) 636-6074 and we will get someone out to look at it.
We also serve the surrounding parishes. Check our service areas page to see if we cover your neighborhood, from Harahan to Harvey and Slidell to LaPlace.
Metal Shingle Roofing in New Orleans: Pricing Guide
| Service | Price | Details |
|---|---|---|
| Metal shingle roof installation | Starting at $9/sq ft | Includes tear-off of one layer, synthetic underlayment, metal shingles, and standard trim. |
| Metal shingle roof replacement | Starting at $11/sq ft | Includes tear-off of two layers, deck inspection and repair, and full flashing replacement. |
| Metal shingle roof repair | Starting at $450 | Includes replacement of damaged shingles, resealing flashing, and re-fastening lifted panels. |
| Metal shingle over existing shingles | Starting at $7/sq ft | Includes roof preparation, underlayment, and metal shingle installation over one existing layer. |
| Complex or historic home | On estimate | Custom trim, color matching, and historic district details need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (504) 636-6074, no obligation to book. |
Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (504) 636-6074.