Serving the New Orleans area  ·  (504) 636-6074  ·  Open Mon-Sun 7am-7pm
📞 (504) 636-6074 Free Quote

Metal Roofing in Kenner, LA (70065) · Local Professionals

New Orleans Metal Roofing · Fast response in Kenner and the New Orleans area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+273Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kenner is a city of post-war brick ranches and raised bungalows, many with low-pitched shingle roofs that have taken a beating from decades of hurricanes, tropical storms, and humid summers. The lots are tight, the live oaks are big, and the airport noise is just part of life. If you live near Williams Boulevard or the lakefront, you know the wind and rain can find every weak spot in an old roof.

That's why homeowners in Kenner (70065) call New Orleans Metal Roofing. We've replaced and repaired roofs on the same slab ranches and camelbacks you see off Veterans Boulevard and around Laketown, and we know how to handle the wind uplift, the algae streaks, and the falling oak limbs that come with the territory.

Metal Roofing in Kenner (70065)

Kenner sits on flat ground between the river and Lake Pontchartrain, and most of the housing stock is post-war: brick ranches with low-slope roofs, raised bungalows, and newer subdivisions with tight setbacks. The soil shifts, the humidity stays high, and summer thunderstorms roll through with wind that can peel back shingles or lift panels. We see a lot of failed fasteners, separated seams, and flashing gaps around chimneys and skylights, especially on roofs that are 20 years old or more. Access can be tricky on narrow streets near the airport, and we plan for that with compact equipment and careful staging.

Our team has worked throughout Kenner and the surrounding New Orleans area, from the older neighborhoods near Kenner Discovery Health Sciences Academy to the newer builds off Joe Yenni Boulevard. We know which profiles hold up to our wind and rain, and we install them with the fastening patterns and underlayment that meet local code.

Our services in Kenner

How a Job Works in Kenner

Step 1: You call us at (504) 636-6074 or request a free estimate online. We schedule an on-site assessment at your Kenner property, usually within a few days. We inspect the roof, check the attic and flashing, and talk with you about what we find. You get a written estimate with options, no pressure.

Step 2: Once you approve, we pull the permits required by the City of Kenner and schedule the work. On tight lots near the airport or in older neighborhoods, we use compact lifts and hand-carry materials to avoid damaging fences or landscaping. If your home is in an HOA, we coordinate color and profile approvals before ordering. Most residential re-roofs take two to four days, weather permitting.

Step 3: After installation, we clean the site thoroughly, including magnet sweeps for nails, and walk the roof with you to show you the finished work. We don't leave until you're satisfied and the property is clean.

Pricing in Kenner depends on the size and pitch of your roof, the condition of the decking, and how accessible the property is. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam from $10 per square foot, and metal shingle roofing from $9 per square foot. If you're replacing an existing shingle roof, metal roof replacement starts at $9 per square foot, and a retrofit over shingles starts at $7 per square foot. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. We always provide a free estimate with a clear breakdown, so call (504) 636-6074 to get started.

My Kenner ranch has a low-pitch roof and I'm worried about wind uplift. What metal roof do you recommend?
For low-slope roofs common in Kenner, we often recommend standing seam with concealed fasteners or a mechanically seamed profile. These systems are tested for high wind uplift and perform well in our storm seasons. We'll assess your roof pitch and decking during the free estimate and recommend the best option.
A storm just tore off some shingles in Kenner. How fast can you get out for an emergency repair?
We prioritize storm damage calls in Kenner and the surrounding area. Call us at (504) 636-6074, and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the roof to prevent further damage and provide a written estimate for permanent repairs.
What's the typical cost for a metal roof replacement on a 1,500-square-foot ranch in Kenner?
For a 1,500-square-foot ranch with a standard pitch, metal roof replacement typically ranges from $9 to $12 per square foot installed, depending on the profile and any decking repairs. That puts a ballpark figure around $13,500 to $18,000. We'll give you an exact quote after inspecting your roof.
Do I need a permit from the City of Kenner to replace my roof?
Yes, the City of Kenner requires a permit for roof replacements. Requirements and fees vary, so we handle the permitting process for you. We'll verify current rules with the building department and make sure the work meets code.
My HOA in Kenner has design rules. Can you help with approval for a metal roof?
We regularly work with HOAs in Kenner. We can provide product samples, color chips, and specification sheets for your HOA's architectural review. We'll coordinate with your board to ensure the profile and color meet the community standards before we order materials.
Are you fully insured for work at my Kenner property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance should I do on my metal roof in Kenner to prevent leaks?
Inspect your roof and gutters twice a year, especially after storm season. Clear debris from valleys and gutters, check for loose fasteners or lifted panels, and look for signs of algae or mildew. We offer free inspections and can perform minor maintenance to keep your roof in good shape.
Why choose us?

Trusted professionals in New Orleans

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in New Orleans

All your work handled by qualified professionals in New Orleans

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

273+ Verified Client Reviews in New Orleans

⭐⭐⭐⭐⭐ 4.9/5 · 273 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in New Orleans · Response within 24h · No commitment · ☎ (504) 636-6074

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in New Orleans ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm